Rear Bottom Cover - HP ENVY PRO Maintenance & Service Manual

Rear bottom cover

The bottom rear cover hides rear ports and the RTC battery. To remove the cover, remove the caps from atop
both screws at the bottom of the computer under the feet, and then turn the screws to loosen the cover. Then
pry the cover off the computer. The following image shows screw cover locations.
To remove the rear bottom cover:
1. Prepare the computer for disassembly (see
2. Use a tool to pry the screw covers from atop the screws.
NOTE:
18 Chapter 4 Removal and Replacement Procedures
Only the right screw cover is shown in the following image.
Preparing to disassemble the computer on page 17).