Tenant Service - Panasonic KX-TDA30 Features Manual

2.2 System Configuration—Software
2.2.3

Tenant Service

Description
This PBX can be shared with a certain number of tenants.
1.
Tenant Configuration
1.1
Tenant Member
The tenant members consist of extension user groups. One extension user group can belong to
only one tenant. Therefore, one extension can belong to only one tenant.
(→ 2.2.2 Group)
1.2
Time Service
Each tenant has a Time Table. The Start and/or End time of each time mode (day/lunch/break/
night) can be set for each day of the week. The Time Table numbers correspond to the tenant
numbers respectively.
(→ 2.2.4 Time Service)
[Example]
Tenant 1
Extension
User Group 1
Extension
User Group 2
Extension
User Group 3
Extension
User Group 4
Use Time Table 1
2.
System Management
Each of the following system management items can be assigned to each tenant.
a)
Tenant Operator (extension number/floating extension number of incoming call distribution
group/none) (→ 2.2.5 Operator Features)
→ 2.12.6 [6-6] Tenant—Operator (Extension Number)
b)
ARS Mode (Off/Local Access/All Access/System) (→ 1.10.1 Automatic Route Selection
(ARS))
→ 2.12.6 [6-6] Tenant—ARS Mode
c)
Music Source for Music on Hold (System/BGM Number/Cyclic Tone)
(→ 1.13.4 Music on Hold)
→ 2.12.6 [6-6] Tenant—Music On Hold
d)
System Speed Dialling (System/Extended for KX-TDA30 or System/Tenant Exclusive for KX-
TDA100/KX-TDA200/KX-TDA600)
(→ 1.6.1.5 Speed Dialling—Personal/System)
→ 2.12.6 [6-6] Tenant—System Speed Dial
Hardware Requirement: An EMEC or MEC card
400 Feature Guide
Tenant 2
Extension
User Group 5
Extension
User Group 6
Use Time Table 2