Enabling The Syslog Server - NETGEAR WNDAP350 Reference Manual

Enabling the SysLog Server

The SysLog screen allows you to enable the SysLog option if you have a SysLog server on
your LAN.

To enable a SysLog server:
1. Under the Configuration tab on the main menu, select System, then select the
Advanced option, and select SysLog to view the screen shown in
SysLog server.
Figure 35. Enable SysLog server
2. Enable SysLog. Enable this option if you have a SysLog server on your LAN. If enabled,
you must enter the IP address of your SysLog server and the port number your SysLog
server is configured to use. The default is Disabled.
3. SysLog Server IP Address. The access point will send all the SysLog to the specified IP
address if SysLog option is enabled.
4. Port Number. The port number configured in the SysLog server on your LAN. Default is
514.
5. Click Apply to save your SysLog settings.
ProSAFE Dual Band Wireless N Access Point WNDAP350
Management
58
Figure 35, Enable