Configuring Wep - NETGEAR WNDAP350 Reference Manual

8. Wireless Client Security Separation is disabled by default. If enabled, the associated
wireless clients will not be able to communicate with each other.
9. If the hubs/switches on your LAN support the VLAN (802.1Q) standard and this feature has
been enabled, the default VLAN ID for WNDAP350 will be associated with each profile. The
default Profile VLAN ID must match the IDs used by other network devices.
10. Click Apply to save your Security Profile settings.
11. Click Back. Your new settings will appear in the Security Profiles table identified by the
Profile Name of the profile. A VLAN ID will also be assigned to your profile.
Note: Security Profiles that share the same type of network authentication
need not share the same passphrase or keys.

To enable your Security Profile:
1. Check the radio box in the Enable column next to your profile.
2. Click Apply. Your Security Profile will be enabled. If you enabled VLAN 802.1Q, your VLAN
Profile will also be enabled. (See
802.1Q.)

Configuring WEP


To configure WEP data encryption:
1. From the Network Authentication drop-down menu, choose either Open System or
Shared Key authentication.
2. From the Data Encryption drop-down menu, select encryption strength (64 bits, 128 bits, or
152 bits).
3. You manually or automatically program the four data encryption keys. These values must be
identical on all PCs and wireless access points in your network. Choose either:
• Automatic. Enter a word or group of printable characters in the Passphrase box and
click the Generate button. The four key boxes will be automatically populated with key
values.
• Manual. Enter the number of hexadecimal digits appropriate to the encryption
strength: 10 digits for 64-bit, 26 digits for 128-bit and 32 digits for 152-bit (any
combination of 0-9, a-f, or A-F)
4. Select which of the four keys will be the default.
ProSAFE Dual Band Wireless N Access Point WNDAP350
Setting Basic IP Options
Basic Installation and Configuration
on page 24 to enable VLAN
41