Protective Structures - MASSEY FERGUSON 410 Operators Instruction Book

Protective structures

ROPS
A Roll Over Protective Structure (ROPS) and seat
belt is fitted as standard equipment to the footstep
tractor at the time of factory assembly. If the ROPS
was removed by the original purchaser or has been
removed, it is recommended that you equip your
tractor with a Roll Over Protective Structure and a
seat belt. ROPS are effective in reducing injuries
during overturn accidents. Overturning a tractor
without ROPS can result in serious injury or death
(Fig. 3).
If a fold down ROPS is installed DO NOT wear seat
belt when the ROPS is in the folded down position.
Operation
*Before using the tractor ensure that the ROPS
frame
is not damaged, that it is securely fastened to the
tractor and if a hinged section is fitted that it is in
the
raised position and secured.
*If the ROPS has been removed from the tractor,
or
folded down for a specific operation, it must be
refitted or erected immediately afterwards using
the proper hardware and applying the
recommended torque values.
*DO NOT attach chains, ropes, or cables to the
ROPS
for pulling purposes; this will cause the tractor to
tip
backwards. Always pull from the tractor drawbar.
*Always wear your seat belt - adjusted snugly
except
when operating with a folded down ROPS.
*Check the seat belt for damage. A damaged seat
belt must be replaced (Fig. 4).
Damage to the ROPS
If the tractor has rolled over or the ROPS has been
damaged (such as striking an overhead object during
transport), the ROPS must be replaced to provide
the original degree of protection.
After an accident, check for damage to the ROPS,
operator's seat, seat belt and seat belt mountings.
Before you operate the tractor, replace all damaged
parts.
DO NOT WELD, DRILL, BEND OR STRAIGHTEN
THE ROPS. To do so reduces the protection it offers.
410/420/430 - 001 8903 U1
UZEL
Fig. 3
Fig. 4
Introduction
9