MASSEY FERGUSON 410 Operators Instruction Book page 104

Specifications
Front axle
Type
Adjustment
Two wheel drive -
Four wheel drive -
Wheel camber
Wheel castor
Axle beam nut torque
Track rod torques - Large lock-nut
Track rod torques - Location bolt
Track rod torques - Location bolt nut
Maximum vertical static load
Two-wheel front axlewheel nut and bolt torques:
Wheel nut torque
Electrical system:
Voltage
Battery:
Capacity
Starter motor - normal duty
Starter motor - rating
Alternator
Light bulbs - all 12 Volt
Application
Headlight (White)
Work light
Warning light-turn indicator
Hydraulic System:
Linkage pump
Maximum pump output
Maximum pump pressure:
All models
Filtration
Lift cylinder size
Maximum lift capacity at the lower links with links horizontal:
Models 410
420/430
Hydraulic linkage
104
Watts Type
60/55 W H4 Halogen
55 W H3 Halogen
21 W Single center contact
Single center contact
Three section with telescopic outer arms and three-
bolt fixing.
102 mm (4 in) increments from 1220 mm (48 in) to a
maximum of 1524 mm (60 in).
102 mm (4 in) increments from 1372 mm (54 in) to a
maximum of 1676 mm (66 in).
3º 30'
4º 56'.
205 Nm (150 lbf ft).
280 Nm (206 lbf ft).
85 Nm (63 lbf ft).
35 Nm (25 lbf ft).
2025 kg (4464 lbf) at 1320 mm (52 in).
110 Nm (81 lbf ft).
12 volt negative earth.
One 770 CCA (SAE)
100 Ampere Hour (AH)
3 kW.
50 amp hour.
Four-cylinder scotch yoke pump, driven from the
forward end of the PTO shaft supplying oil under
pressure to the linkage ram cylinder, and four external
take off points.
All tractors 16,7 liter/min (4.4 US gal/min).
176 bar (2550 psi).
140 micron washable strainer.
79,4 mm (3 1/8 in).
1450 kg (3196 lbf)
1790 kg (3946 lbf)
Category 1 and 2 interchangeable ball ends.
Cap MF part number
P45t
PK22s 1628 494 M1
BA15s 621 235 M1
BA15s 1420 037 M1
410/420/430 - 001 8903 U1
UZEL