MASSEY FERGUSON 410 Operators Instruction Book page 32

Controls and Instruments
Height adjustment:
To adjust the seat for height, pull up the hand grip
on the back of the seat (4. Fig. 39) and move the
seat up or down as required. Allow the seat to lock
into position.
Seat belt
The seat belt (Fig. 40) is a simple lap type, it can
only be effective if:
The seat is properly adjusted, the belt is not twisted
or allowed to rub against any sharp edges, the buckle
is securely fastened, the belt is correctly tensioned
and there is no slack.
To fasten, pull the buckle (1) across the lap and push
it into the lock (2). A click and upward movement of
the lock release button (3) will indicate that the belt
is locked.
To release, press the lock release button downwards.
Adjust the belt by pulling the short end (4) of the
webbing through the adjuster (5) until the belt is
comfortably tight. Slide the end along the webbing
to take up any slack after final adjustment.
When not in use, the seat belt should be stored on
the clip provided to keep it from being damaged or
becoming dirty.
32
Fig. 39
Fig. 40
410/420/430 - 001 8903 U1
UZEL