Table of Contents
Advertisement
Tractor Models Applicable:
For cab tractor models:
4225, 4235, 4245, 4255, 4260, 4270.
Serial numbers applicable:
K 27456 onwards.
Manufactured from 2001 onwards.
Published by:
AGCO Limited,
Banner Lane,
Coventry,
England CV4 9GF
MF and MASSEY FERGUSON are registered trademarks of AGCO Corporation or one of its subsidiaries.
4200 cab - M2
WEO
4200 Series Cab Tractor
Operator Instruction Book
Contents - Page
General Information - 3
Tractor identification.
Introduction.
Warranty, pre-delivery and installation on the farm.
Safety notes.
Safety decals.
Controls and Instruments - 21
Controls.
Instruments.
Operation - 45
Starting.
Running-in.
Operating the tractor.
Maintenance and Adjustment - 99
Maintenance chart.
Recommended lubricants.
Servicing the tractor:
Greasing, checking levels and changing oil.
Adjustments - axles, brakes and wheels.
Replacements - fuses, bulbs and battery.
Fuel storage.
Accessories - 167
Specification - 173
Alphabetical Index - 191
TL 3686
August 2002
1857 230 M2
© AGCO Limited 2001
Issue 2
1
Advertisement
Table of Contents
Related Manuals for MASSEY FERGUSON 4200 Series
Summary of Contents for MASSEY FERGUSON 4200 Series
- Page 1 Published by: AGCO Limited, August 2002 Banner Lane, 1857 230 M2 Coventry, Issue 2 England CV4 9GF © AGCO Limited 2001 MF and MASSEY FERGUSON are registered trademarks of AGCO Corporation or one of its subsidiaries. 4200 cab - M2...
- Page 2 Serial Numbers NOTE: Observe the serial numbers of your tractor. Always quote the serial numbers in any communication to your Massey Ferguson Dealer. Tractor Model:..............Tractor Serial No. (Fig. 1 and Fig. 2): ..................Engine Serial No. (Fig. 3): ..........
-
Page 3: Table Of Contents
Introduction, Warranty and Safety Notes Contents Introduction ........... 4 Pre-delivery, Installation on the Farm and Warranty . -
Page 4: Introduction
Dealer. give years of service in the tradition of Massey Ferguson. In accordance with the Company's policy of continuous The installation of the product on the farm by the Dealer... -
Page 5: Safety
Parts Warning WARNING: In some of the illustrations used in this Operator Instruction Book, panels or The fitment of non Massey Ferguson parts may result in guards may have been removed for clarity. a part of substandard quality being used. Massey... -
Page 6: Introduction To Safety
Additional precautions may be necessary, depending on attachments and equipment. attachments used and conditions at the work site or in the service area. Massey Ferguson has no direct control over tractor application, operation, inspection, lubrication, or maintenance. Therefore it is YOUR responsibility to use good safety practices in these areas. -
Page 7: Follow A Safety Programme
Safety Notes Danger, Warning and Caution Observe the Following Whenever you see the words and symbols shown below, DO NOT allow children or unqualified persons to used in this book and on decals, you MUST take note of operate your tractor. Keep others away from your their instructions as they relate to personal safety. -
Page 8: Protective Structures
If additional controls or displays are to be added to the ROPS . To do so reduces the protection it offers. operator's area contact your Massey Ferguson Dealer for information as to how this can best be done. The ROPS cab together with the seat belt is effective in The safety cab has been designed for fitment to this reducing injuries during overturn accidents. -
Page 9: Prepare For Safe Operation
DON'T UNDERSTAND, ASK SOMEONE (such as your equipment Dealer) TO EXPLAIN IT TO YOU. IMPORTANT: This manual covers general safe practices for agricultural tractors. It must always be kept with the tractor. For further copies contact your Massey Ferguson Dealer. TL 104 Fig. 9 4200 cab - M2 Find manuals at https://best-manuals.com... - Page 10 Safety Notes Use all Available Protective and Safety Devices Keep all protective devices in place and securely fastened. Make certain all guards, shields and safety signs are properly installed, as specified, and are in good condition. To help keep you and others around you safe, your tractor must be equipped with: Roll Over Protective Structure (ROPS), and seat belt.
-
Page 11: Servicing The Tractor
Safety Notes Check that the PTO driveline locking devices are latched. Check that the tractor PTO shield and driveline guards are in place and operating properly. Check the tractor and implement hydraulic system. Have any leaks or damaged parts repaired or replaced. -
Page 12: Starting
Safety Notes Starting Warn Personnel before Starting Before starting, walk completely around the tractor and any attached equipment. Make sure that no one is under it, on it, or close to it. Let other workers and bystanders know you are starting up and don't start until everyone is clear of the tractor, implements and towed equipment. -
Page 13: Work Safely
Safety Notes Starting Fluid WARNING: DO NOT use aerosol cans of starting aid on tractors with the thermostart connected to the electrical system. Ether combined with thermostart can cause an explosion with damage to engine, personal injury, or both. Your tractor has been fitted with a thermostart cold starting device. - Page 14 Safety Notes Watch out for Others Be aware of what is going on. DO NOT allow an untrained or unqualified person to operate your tractor. They could injure themselves or someone else. WARNING: Your tractor is a one-person machine. DO NOT permit others to ride on the tractor or the implement (see Fig.
- Page 15 DO NOT pull anything using the top link connection, or from any point above the centre line of the rear axle. Always use an approved Massey Ferguson TL 3383 drawbar, and only use a drawbar pin that locks in Fig.
- Page 16 Safety Notes General Operating Hazards Ensure that the PTO shield (1) is in place and that the PTO cap (2) is fitted when the PTO driveline is not in use (Fig. 21). Before attaching, detaching, cleaning or adjusting PTO driven implements, disengage the PTO, stop the engine, remove the key, and make sure that the PTO driveline has stopped.
- Page 17 Provide only enough slack in the chain to permit turning. See your Massey Ferguson Dealer for a chain with a strength rating equal to, or greater than the gross weight of the towed machine (Fig. 23).
-
Page 18: After Operation
Safety Notes Make sure tractor and equipment are equipped with Slow Moving Vehicle (SMV) (Fig. 25) signs and other marking aids recommended for improved visibility, or beacon (Fig. 26) if the law requires them. Rules of the Road WHEN operating your tractor on a public road a number of precautions must be taken. - Page 19 Safety Notes Safety Decals and Locations 3808 566 M1 3808 551 M1 Located inside cab on right-hand centre pillar. Located inside cab on right-hand centre pillar. WARNING: In the event of an CAUTION: Be aware - Read overturn, hold on to the steering the Operator Instruction Book wheel.
- Page 20 Safety Notes 3808 554 M1 3808 499 M1 Located on right- and left-hand side of radiator. Located on right- and left-hand side of radiator. WARNING: Keep hands clear of rotating fan blades WARNING: Stand clear. while the engine is running. Beware hot parts Keep guards in place.
- Page 21 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...