Toshiba T3300SL Maintenance Manual page 86

Select an interleave number (usually 1) and press Enter. The following message will
(3)
appear.
[ HDD TYPE ] : CYLINDER = xxxx
[ HDD TYPE ] : HEAD
[ HDD TYPE ] : SECTOR
Press [Track number (CCCCHH) key ?
Type the four-digit track number and press Enter. The first three digits indicate the
(4)
cylinder and the last digit indicates the head number. This formats either good tracks
or bad tracks as selected.
NOTE: This program can format only one track per operation. Repeat the operation as
many times as necessary to format several good tracks or bad tracks.
(5) After a track on the hard disk has been formatted, the following message will be
displayed.
Format complete
Press Enter to return to the Hard Disk Format menu.
(6)
4. Bad track CHECK option
(1) When this option is selected, the following message will appear.
Drive number select (1:#1,2:#2) ?
(2) Select a drive number and press Enter. The following message will appear.
Interleave number (1/1-8) ?
Select an interleave number (usually 1) and press Enter. The following message is
(3)
displayed, and the bad tracks on the hard disk are checked.
[ HDD TYPE ] : CYLINDER = xxxx
[ HDD TYPE ] : HEAD
[ HDD TYPE ] : SECTOR
[[cylinder, head = xxxx xx]]
(4) After checking the bad tracks on the hard disk, the following message will appear.
Format complete
Press Enter to return to the Hard Disk Format menu.
(5)
3-40
= xx
= xx
= xx
= xx