Hard Disk Drive And Battery Pack Case; Removing The Hard Disk Drive And Battery Pack Case - Toshiba T3300SL Maintenance Manual

4.6 Hard Disk Drive and Battery Pack Case

4.6.1 Removing the Hard Disk Drive and Battery Pack Case

1. Turn off the power to the T3300SL. Disconnect the AC adapter and all external cables
connected to the T3300SL.
2. Remove the battery terminal assembly as instructed in Section 4.5.
3. Disconnect the HDD cable from the HDD (Figure 4-12).
4. Remove the single M2x4 screw securing the 150-pin expansion port. Slide the 150-pin
expansion port to the right to release it from its latch. Lift the port up and gently lay it on
the system board (Figure 4-13).
HDD cable
Figure 4-12 Disconnecting the flexible HDD cable
Figure 4-13 Disconnecting the 150-pin expansion port
4-19