Eco Dect; Setting The Alarm Clock; Using A Handset As A Room Monitor (Babyphone) - Gigaset C610H Manual

ECO DECT

ECO DECT
You are helping to protect the environment
with your Gigaset handset.
Reducing energy consumption
By using a power-saving adapter plug, your tel-
ephone consumes less power.
Reducing radiation
(dependent on base)
The radiation can only be reduced if your
base supports this function.
The transmission power of your telephone is
automatically reduced depending on the dis-
tance to the base.
You can reduce the radiation of the handset
and base even further by using Eco Mode or
Eco Mode+. For further information, please
refer to your base user guide.

Setting the alarm clock

Prerequisite: The date and time have already
been set (¢ page 13).
Activating/deactivating the alarm
clock and setting the wake-up time
É
v
¢ ¢ Alarm Clock
¤ You can enter data in the following fields:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
Volume:
Set the volume (1–6).
Melody:
Select melody.
§Save§
Press the display key.
¼
In idle status, the icon and wake-up time
are displayed.
A wake-up call is signalled on the display and
with the selected ringtone (¢ page 2). The
wake-up call sounds for 60 seconds. If no key is
pressed, the wake-up call is repeated twice at
five minute intervals and then switched off.
34
During a call, the wake-up call is only signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Prerequisite: A wake-up call is sounding.
§OFF§
Press the display key. The wake-
up call is deactivated.
or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repetition
the wake-up call is deactivated
completely.
Using a handset as a room
monitor (Babyphone)
If the room monitor is activated, a previously
saved destination number is called as soon as a
set noise level is reached. You can save an inter-
nal or external number in your handset as the
destination number. All of the handset keys are
deactivated, with the exception of the display
keys.
The room monitor call to an external number is
terminated after approximately 90 seconds.
The room monitor call to an internal number
(handset) stops after approx. 3 minutes
(depending on the base). When the room mon-
itor is activated, all keys are locked except the
end call key. The handset's speaker can be
switched on or off (Two Way Talk = On or Off).
If Two Way Talk is switched on, you can answer
the room monitor call.
When the room monitor is activated, incoming
calls to the handset are indicated without a
ringtone and are only shown on the screen.
The display and keypad are not illuminated and
advisory tones are also turned off.
If you accept an incoming call, the room moni-
tor is suspended for the duration of the call, but
the function remains activated.
If you deactivate then reactivate the handset,
the room monitor remains activated.