Eco Dect - Gigaset E370A User Manual

ECO DECT

Deactivate baby monitor / cancel alarm
Deactivate the baby monitor:
Cancel the alarm:
Deactivate the baby monitor remotely
The alarm is forwarded to an external destination number.
The receiving phone supports tone dialling.
¤
Accept alarm call
The baby monitor is deactivated and the handset is in idle status. The baby monitor settings
on the handset (e.g. no ringtone) will remain activated until you press the display key OFF.
Reactivate baby monitor with the same number:
Save
ECO DECT
The device range is set to maximum as default. This guarantees the best connection between
the handset and the base station. In idle status, the handset will not function (as it is not
transmitting). Only the base station will maintain contact with the handset via a low wireless
signal. During a call, the transmission power automatically adapts to the distance between the
base station and handset. The smaller the distance to the base, the lower the radiation.
To reduce the radiation further:
Reducing radiation by up to 80%
¤
. . . use
Range Change (
The range is also reduced with this setting.
It is not possible to use a repeater to increase the range.
42
¤
In idle status press the display key OFF
¤
Press the End call key
Press keys
to select Settings
= off )
during an alarm
. . . Activation to switch back on (
OK ECO DECT
p. 41)
OK Maximum