Page 2
Gigaset C610 IP-base A power adapter for connecting the base station to the power supply A telephone cable for connecting the base to the telephone network with an RJ11 port. Do not use this cable – it is not needed in the Telio setup...
Page 3
(Do not use the RJ11 port) Ethernet cable (RJ45) Power cable...
Page 4
5. Insert the batteries provided in the Gigaset handset. 6. Connect the power cable for the handset to the charger and connect the charger to a power socket.
Page 5
1. Press the menu button (the big black button with a white line) 2. Use the navigation buttons around the menu button and go to Settings > Registration > Register Handset. Press OK to confirm each menu choice. The handset will now search for the base.
Page 6
If you wish to connect a different handset, please see the instructions for the handset you want to connect. You can find information on which Gigaset products are compatible with the Gigaset C610 IP-base at Gigasets homepage at www.gigaset.com under “Support”.
Page 7
When you have completed connection, it may take up to ten minutes before your telephone is ready for use. The Gigaset C610 IP-base will display a blue light when the phone is ready. Check that all cables are correctly connected.
Page 8
Teliophone is a smart phone app that allows you to use voice over IP technology to make calls on your mobile phone. No matter where in the world you are, when you make a call using Teliophone with your Telio subscription and phone number, the cost of your call will be as if you had made it from home.