TP-Link Archer C20 User Manual page 68


Note:
If you check the
find a notice in red as shown in
Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8
•
to 64 Hexadecimal characters. The default password is the same with the default PIN
code, which can be found in Figure 4-32.
Group Key Update Period - Specify the group key update interval in seconds. The
•
value should be 30 or above. Enter 0 to disable the update.
WPA /WPA2- Enterprise - It's based on Radius Server.

Authentication Type - you can choose the version of the WPA security on the
•
drop-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected
Access) or WPA2 (WPA version 2) automatically based on the wireless station's
capability and request.
Encryption - You can select either Automatic, or TKIP or AES.
•

Note:
If you check the WPA/WPA2-Enterprise
find a notice in red as shown in Figure
Radius Server IP - Enter the IP address of the Radius server.
•
Radius Server Port - Enter the port number of the Radius server.
•
Radius Server Password - Enter the password for the Radius server.
•
WPA/WPA2-Personal
Figure
Figure 4-37 WPA/WPA2 – Personal
Figure 4-38 WPA/WPA2 - Enterprise
Archer C20 AC750 Wireless Dual Band Router
radio button and choose TKIP encryption, you will
4-37.
radio button and choose TKIP encryption, you will
4-38.
- 56 -