Reboot; Password - TP-Link Archer C20 User Manual


Note:
The current configuration will be covered with the uploading configuration file. Wrong process will
lead the device unmanaged. The restoring process lasts for 20 seconds and the router will restart
automatically then. Keep the power of the router on during the process, in case of any damage.
4.21.6

Reboot

Choose menu "System Tools → Reboot", and then you can click the Reboot button to reboot
the router via the next screen.
Some settings of the router will take effect only after rebooting, which include
Change the LAN IP Address (system will reboot automatically).
•
Upgrade the firmware of the router (system will reboot automatically).
•
Restore the router's settings to factory defaults (system will reboot automatically).
•
Update the configuration with the file (system will reboot automatically).
•
4.21.7

Password

Choose menu "System Tools → Password", and then you can change the factory default user
name and password of the router in the next screen as shown in Figure 4-117.
It is strongly recommended that you should change the factory default user name and password
of the router, because all users who try to access the router's Web-based utility or Quick Setup
will be prompted for the router's default user name and password.
Archer C20
Figure 4-116 Reboot the router
Figure 4-117 Password
- 118 -
AC750 Wireless Dual Band Router