Wps - TP-Link Archer C20 User Manual

Authentication Type - This option should be chosen if the key type is WEP(ASCII) or

WEP(HEX). It indicates the authorization type of the Root AP.
Encryption - When WPA is set as the Authentication Type, you can select either TKIP

or AES as Encryption.
Password - If the AP your router is going to connect needs password, you need to fill

the password in this blank.
4.6.2

WPS

Choose menu "Wireless 2.4GHz →WPS", you can the screen as shown in Figure 4-17. This
section will guide you to add a new wireless device to an existing network quickly by WPS (Wi-Fi
Protected Setup) function.
WPS - Enable or disable the WPS function here.

Current PIN - The current value of the router's PIN is displayed here.

Restore PIN - Restore the PIN of the router to its default.

Generate New PIN - Click this button, and then you can get a new random value for the

router's PIN. You can ensure the network security by generating a new PIN.
Disable device PIN - If this box is checked, and then wireless clients will not be able to

connect to the wireless network with PIN code.
Add device - You can add a new device to the existing network manually by clicking this

button.
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and router using either Push Button Configuration (PBC)
method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Archer C20 AC750 Wireless Dual Band Router
Figure 4-17 WPS
- 39 -