TP-Link Archer C20 User Manual page 62

Wireless Network Name - Also called the SSID (Service Set Identification). Enter a value of

up to 32 characters. The same name must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is set to be
TP-LINK_XXXX_5G. This value is case-sensitive. For example, TEST is NOT the same as
test.
Region - Select your region from the drop-down list. This field specifies the region where the

wireless function of the router can be used. It may be illegal to use the wireless function of
the router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the drop-down list, click the Save button, then the
Note Dialog appears. Click OK.

Note:
Limited by local law regulations, version for North America does not have region selection
option.
Mode - Select the desired mode.

11an mixed - Select if you are using both 802.11a and 802.11n wireless clients. If you

set the Mode 11an mixed, all of 802.11a and 802.11n wireless stations can connect to
the router.
11a/n/ac mixed - Select if you are using a mix of 802.11a, 802.11n and 802.11ac

wireless clients. It is strongly recommended you set the Mode 11a/n/ac mixed, all of
802.11a, 802.11n and 802.11ac wireless stations can connect to the router.
Channel - This field determines which operating frequency will be used. The default channel

is set to Auto, so the router will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
Enable SSID Broadcast - When wireless clients survey the local area for wireless networks

to associate with, they will detect the SSID broadcast by the router. If you select the Enable
SSID Broadcast checkbox, the Wireless router will broadcast its name (SSID) on the air.
Archer C20 AC750 Wireless Dual Band Router
Note Dialog
- 50 -