TP-Link Archer C20 User Manual page 25

select "No, I do NOT need to clone MAC address" and then click Next. If it is necessary
in your case, please select "Yes, I need to clone MAC address" and then click Next.
2) If the connection type detected is Static IP, the next screen will appear as shown in
Figure 3-8. Configure the following parameters and then click Next to continue.
IP Address - This is the WAN IP address as seen by external users on the Internet

(including your ISP). Your ISP will provide you with the IP address you need to enter
here. Enter the IP address into the field.
Subnet Mask - The Subnet Mask is used for the WAN IP address. Your IPS will provide

you with the subnet mask which is usually 255.255.255.0.
Gateway - Your ISP will provide you with the Gateway address which is the ISP server's

address. Enter the gateway IP address into the box if required.
DNS Server – (Optional) Enter the DNS Server IP address into the box if required.

Secondary DNS Server-(Optional) If your ISP provides another DNS server, enter it into

this field.
Archer C20
Figure 3-7 Quick Setup – MAC Clone
Figure 3-8 Quick Setup - Static IP
- 13 -
AC750 Wireless Dual Band Router