TP-Link Archer C20 User Manual page 65

Step 2: Press and hold the WPS button of the client device directly.
Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup
process.
Step 4: When the WPS LED is on, the client device has successfully connected to the router.
II. Enter the client device's PIN on the router
Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected
Setup PIN number.
Step 1: Keep the default WPS status as Enabled and click the Add device button in Figure 4-32,
then Figure 4-35 will appear.
Archer C20
Figure 4-33
Figure 4-34 Add A New Device
Figure 4-35 Add A New Device
- 53 -
AC750 Wireless Dual Band Router