Resuming Operation - Panasonic Toughbook CF-37 Series Reference Manual

Suspend/Hibernation Functions
CAUTION
At the "beep*" sound, release your finger from the power switch. If you con-
tinue to press down on the switch and hold it for more than four seconds, the
"beep*" sound will come out again and the power will go off. Data not previ-
ously saved will be lost.
Slide the power switch to power on.
Even when [When I press the power button on my computer] is set to [Shut-
down] with [Control Panel] - [Power Management], if the power switch is pressed,
a beep will sound and The power will go off if the button is pressed for more
than four seconds, although the computer will not completely shut down.
If the computer will not be operated for an extended period of time, it is recom-
mended that hibernation mode be used instead of the suspend mode.
NOTE
With the method below, you can shut down the computer by using the suspend
function.
In [Start] - [Shut Down], select [Stand by].

Resuming Operation

Slide the power switch
If the security indicator (
When the computer enters the suspend mode by the closing of the LCD panel, it will
resume when the LCD panel is opened. If the computer does not resume when the
LCD panel is opened, press the power switch.
When the computer enters the hibernation mode by the closing of the LCD panel, it
will not resume even when the LCD panel is opened.
CAUTION
After the display returns, the computer needs a short period of time to reinitialize.
This takes about 15 seconds. Do not shut down or restart Windows, or use the
suspend or hibernation functions again during this time, as this may subse-
quently cause Windows to operate abnormally.
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
When operation resumes, serial devices such as a mouse, modem or PC Cards
may not function properly. In such cases, you will need to restart your com-
puter or reinitialize the individual devices.
When a password has been set in the Setup Utility,
computer resumes from the hibernation mode, but
the computer resumes from the suspend mode.
) is displayed, your password has been set.
16
appears when the
does not appear when
(To next page)