Resuming Operation - Panasonic Toughbook CF-07 Series Reference Manual

Standby/Hibernation Functions

Resuming Operation

CAUTION
After the display returns, the computer needs a short period of time to reinitialize.
This takes about 30 seconds. Do not shut down or restart Windows, or use the
standby or hibernation functions again during this time, as this may subsequently
cause Windows to operate abnormally.
Do not install or remove peripherals while your computer is in the standby or
hibernation mode; abnormal operation may result.
When operation resumes, serial devices such as a mouse, modem or PC Cards
may not function properly. In such cases, you will need to restart your computer.
Avoid the following until the power is completely turned off when turning off the
computer by using the standby or hibernation functions, or resuming operation
from the standby or hibernation.
• Touch the external keyboard (excluding password input), touchscreen, or power
switch.
• Connect or disconnect the AC adaptor.
To use the security function when using the standby or hibernation mode:
• Use the password of the wireless display. (
the wireless display)
• Use the Windows password as the following.
Select [Start] - [Settings] - [Control Panel] - [Power Management]* - [Advanced],
then add the check mark for [Prompt for password when computer goes off
standby].)
Windows 2000
* : [Power Options]
Press the power switch
After confirming that the DISPLAY READY
indicator is lit, and then waiting for about 30
seconds, turn on the wireless display.
Operating Instructions of
5