Introduction; St And Toe Identification - Belkin F1DN102C User Manual

Belkin® Secure DVI KVM Switch, Secure KM Switch and
Secure Windowing KVM EAL 4 augmented ALC_FLR.3 Security Target
1 Introduction
This section identifies the Security Target (ST), Target of Evaluation (TOE), conformance claims,
ST organization, document conventions, and terminology. It also includes an overview of the
evaluated product.
An ST principally defines:
 A security problem expressed as a set of assumptions about the security aspects of the
environment; a list of threats which the product is intended to counter; and any known
rules with which the product must comply (in Chapter 3, Security Problem Definition).
 A set of security objectives and a set of security requirements to address that problem
(in Chapters 4 and 5, Security Objectives and IT Security Requirements, respectively).
 The IT security functions provided by the Target of Evaluation (TOE) that meet the set of
requirements (in Chapter 6, TOE Summary Specification).
The structure and content of this ST complies with the requirements specified in the Common
Criteria (CC), Part 1, Annex A, and Part 3, Chapter 6.
1.1 ST and TOE Identification
This section provides information needed to identify and control this ST and its Target of
Evaluation (TOE), the TOE Name. This ST targets an Evaluation Assurance Level (EAL) 4
(augmented with ALC_FLR.3) level of assurance.
ST Title:
ST Evaluation:
Revision Number:
ST Publish Date:
ST Authors:
TOE Identification:
Belkin Secure 2‐port DVI‐I KVM Switch w/audio and CAC ‐ Model F1DN102C, Ver. 111111
Belkin Secure 2‐port DVI‐D KVM Switch w/audio ‐ Model F1DN102F, Ver. 111111
Belkin Secure 4‐port DVI‐I KVM Switch w/audio – Model F1DN104B, Ver. 111111
Belkin Secure DVI KVM Switch, Secure KM Switch and Secure Windowing
KVM Security Target EAL 4 augmented ALC_FLR.3 Security Target
EWA, Canada
1.01
July 16, 2012
Carlos Del Toro, Belkin International
Or
Or
Rev. 1.01
Page | 5