Belkin F1DN102C User Manual page 33

Belkin® Secure DVI KVM Switch, Secure KM Switch and
Secure Windowing KVM EAL 4 augmented ALC_FLR.3 Security Target
T.INFECTED
TOE may be attacked by
a coupled COMPUTER
that was infected by a
malicious code inserted
by an unidentified threat
agent causes the TOE to
change its functionality
and subsequent
compromise of the data
flowing through the TOE
or the NETWORKS
connected to its coupled
COMPUTERS.
T.SPOOF
Via intentional or
unintentional actions, a
USER may think the set
of SHARED PERIPHERALS
are CONNECTED to one
COMPUTER when in fact
they are connected to a
different one.
O.ROM
TOE software/firmware shall be
protected against unauthorized
modification. Embedded software
must be contained in mask‐
programmed or
programmable read‐only memory
or fuse protected flash permanently
attached (non‐socketed) to a circuit
assembly.
O.USBDETECT
The TOE shall detect any USB
connection that is not a pointing
device, keyboard,
authentication device or display and
will perform no interaction with
that device after the initial
identification.
O.INDICATE
The AUTHORIZED USER shall receive
an unambiguous indication of which
SWITCHED COMPUTER has been
selected.
O.SELECT
An explicit action
AUTHORIZED USER shall be used to
select the COMPUTER to which the
shared set of PERIPHERAL DEVICES
is CONNECTED. Single push button,
multiple push button, or rotary
O.ROM
This Objective assures that TOE
software/firmware
protected against unauthorized
modification.
one‐time‐ software must be contained in
mask‐programmed,
protected flash or one‐time‐
programmable
memory permanently attached
(non‐socketed) to a circuit
assembly.
O.USBDETECT
This objective
detection of the connection of an
unauthorized device to the TOE
Console USB port. Information
user
from this port would be ignored
and not be passed on to a
connected computer. This
objective also ensures that
invalid
recognized on the keyboard,
pointing
Authentication
display console ports.
O.INDICATE:
The USER must receive positive
confirmation
COMPUTER selection.
O.SELECT:
by the
The USER must take positive
action to select the current
SWITCHED COMPUTER.
Rev. 1.01
will be
Embedded
fuse
read‐only
will ensure
connections are
device, User
device and
of SWITCHED
Page | 33