Installation Method - Nextar NCD60C Instruction Manual

INSTALLATION METHOD

This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, e.g., the Power Supply, the Speakers and the Antenna,
according to the requirements of this Instruction Manual, then install the metal
mounting sleeve into the car as per the diagram illustrated below.
METAL SUPPORT STRAP
DASHBOARD
METAL MOUNTING SLEEVE
To remove the CD player from the cage, insert the
supplied keys into the left and right side slots of the
chassis then pull the chassis out of the cage as shown.
NOTE
Before installing and operating the
Unit, remove the metal mounting
sleeve illustrated by the arrows .
To raise the anti-skip capability of the unit
please ensure the metal support strap is
connected firmly to the car chassis.
Remove the two screws that protect
the CD player during transportation
before operating the player.
Page 6
To properly fix the metal mounting
sleeve, bend the tabs of the sleeve
against the DASHBOARD with a
screwdriver.
UNIT CHASSIS
PLASTIC TRIM FRAME
To attach the removable faceplate, insert the right
side of the faceplate into the right side of the CD
player chassis first. Then push the left side of the
faceplate into the chassis until you hear it click.
To draw the front panel out of the chassis,
press the REL button to eject the front
panel from the unit.
FACEPLATE