Mute Button - Nextar NCD60C Instruction Manual

13. MUTE BUTTON

This button turns the MUTED state on / off .
Press the MU button to mute the loudspeaker temporarily, and press again to
resume listening. The muted state will be also released when the MODE, LOUD,
SEL, + or – button on the front panel is pressed .
14. A.P BUTTON (Auto-storage / Preset station memory scan)
a) Automatic store preset station memory:
During radio mode, press the A.P button and hold for longer than one
second to activate automatic station storage. The radio searches within the
current frequency band, and the six strongest signal stations are allocate to
the corresponding storage locations in each band. The stations that have now
been stored will be played for approximately five seconds each, then the
station storage location is set. Once the radio has finished the searching and
storage, the preset channel number and frequency will appear on the display.
b) Automatic scan preset station memory:
After the A.P button has been pressed briefly, the radio will scan all pre-set
stations in the current frequency band. In the FM band, FM 1, FM 2 and FM 3 are
checked one at a time.
15–20. PRESET STATION MEMORY AND TOP, INT, RPT, RDM BUTTONS
a) During radio mode:
Pressing one of the six buttons briefly directly selects a preset radio station.
If any of the six buttons are pressed for more than 2 seconds, the station
currently being listened to is memorized into the selected preset button.
b) During CD mode :
Press the TOP button briefly to interrupt the playback of the CD.
Press again to resume normal playback of the CD.
Press the TOP button and hold for approximately 2 seconds to play the first
track of the current disc.
Press the INT button to play the first 10 seconds of each track.
Press again to stop the scan while the currently selected track will be played.
Press the RPT button to play the current track repeatedly.
Press again to cancel this function.
Press the RDM button to play all tracks on the disc in random order.
Press again to cancel this function.
21. LOCAL / DX BUTTON
Radio station search mode is divided by this LO / DX switch, which can be
used to control an attenuator in the tuner during searching. The detecting level
of seek, scan and auto-memory will be reduced based on the attenuated level
of the tuner. In radio mode, press the LOC button to change to local or distance
reception. Note: This button is only for FM reception. In AM mode, LOC is void .
22. ST / MO BUTTON
In radio mode, press ST briefly to select stereo or mono sound mode.
Page 4