Installation Method - Nextar NCU101 Instruction Manual

INSTALLATION METHOD

This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal
mounting sleeve into the car as per the diagram illustrated below.
METAL SUPPORT STRAP
To raise the anti-skip capability of the unit
please ensure the metal support strap is
connected firmly to the car chassis.
DASHBOARD
METAL MOUNTING SLEEVE
To remove the CD player from the Cage insert the
supplied keys into the Left and Right side slots of the
chassis then pull the chassis out of the cage as shown.
NOTE
Push this reset button with a
cuspidal object to renovate the
distorted program once the program
is distorted.
To remove the front panel from the unit chassis,
p ress the REL key to release the front panel from
the unit chassis, the n pu ll it up a little to take out
fro m th e un it chassis.
Remove the two screws that
protect the CD player during
transportation before operating
the player.
RESET BUTTO N
E 10
To properly fix the metal mounting
sleeve, bend the tabs of the sleeve
against the DASH BOARD with a
screwdriver.
UNIT CHASSIS
PLASTIC TRIM RING
FRONT PANEL
To attach the removable faceplate, insert the
right side of the faceplate into the left of the
CD player chassis first. Then push the left side
of the faceplate into the chassis until.
N OTE:
When needing to insert MM C/SD card
into the M MC/S D card compartment or
to insert USB bar into the U SB socket,
pull the plastic cover rightward away
from the player and then store it for safety.
When no needing to do MM C/SD or USB
operation, please m ake the plastic cover
m atch its r ight position in the fr ont panel
and then push it from right to left till get to
the right position of th e fron t panel.