Factory Default Settings; Username And Password - Atlantis Land A02-RA243-W54M User Manual

3.4 Factory Default Settings

Before configurating this WebShare 243WM Wireless , you need to know the following
default settings.
• Username:admin
• Password:atlantis
• IP address (192.168.1.254), Subnet Mask (255.255.255.0)
• DHCP Server: enable
• WAN=PPPoA Routing, VPI=8, VCI=35, VC-Mux
• SSSID= A02-RA243-W54M , Channel=6, WEP/WPA=disable

3.4.1 Username and Password

The default username and password are admin and atlantis respectively.
If you ever forget the password to log in, you may press the RESET button to
restore the factory default settings. After turning the router on press the
Emergency/Failure Recovery Button on the back of the modem, and hold the
button in until all lights on the modem flash and it reboots with factory default
settings (approximately 10 seconds). The login will be reset to admin and the
password will be reset to admin, and the modem will be accessible via its
default IP address at http://192.168.1.254/
WEBSHARE 243WM
19