Chapiter 3; Before Configuration; Connecting The I-Fly Wireless Broadband Router; Windows - Atlantis Land I-Fly 899 A02-WR-54G ME01 User Manual

I-fly wireless broadband router user's manual

Table of Contents

The I-Fly Wireless Broadband Router can be configured with your Web browser. The web browser is

included as a standard application in the following operation systems, UNIX, Linux, Mac OS,

Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and user-friendly interface

for configuration.

This section describes the configuration required by LAN-attached PCs that communicate with the I-

Fly Wireless Broadband Router, either to configure the device or for network access. These PCs must

have an Ethernet interface installed properly, be connected to the Router either directly or through an

external repeater hub, and have TCP/IP installed and configured to obtain an IP address through a

DHCP server or a fixed IP address that must be in the same subnet of the Router. The default IP

address of the ADSL Firewall Router is 192.168.1.1 and subnet mask is 255.255.255.0. The best and

easy way is to configure the PC to get an IP address from the Router. Also make sure you have

UNINSTALLED any kind of software firewall that can cause problems while accessing the

192.168.1.1 IP address of the router.

Please follow the steps below for PC's network environment installation. First of all, please check

your PC's network components. The TCP/IP protocol stack and Ethernet network adapter must be

installed. If not, please refer to MS Windows related manuals.

1. Power on the device

2. Make sure the PWR(green) and SYS(blinking) Leds are OK & LAN(WLAN) Led is lit

3. Connect PC directly to the Router by cable or Wireless

4. Before taking the next step, make sure you have uninstalled any software firewall

Any TCP/IP capable workstation can be used to communicate with or through the

ADSL Firewall Router. To configure other types of workstations, please consult the

manufacturer's documentation.

Chapiter 3

Configuration

Table of Contents

I-fly a02-wr-54g