Dynamic - Atlantis Land I-Fly 899 A02-WR-54G ME01 User Manual

Network Address: Type the static IP address your network uses to access the Internet. Your ISP or
network administrator provides you with this information.
Network Mask: Type the network (subnet) mask for your network. If you do not type a value here,
the network mask defaults to 255.255.255.255. Your ISP or network administrator provides you with
this information.
Gateway Address: Type the gateway address for your network. Your ISP or network administrator
provides you with this information.
Interface: Select which interface, WAN or LAN, you use to connect to the Internet.
Metric: Select which metric you want to apply to this configuration.
Add: Click to add the configuration to the static IP address table at the bottom of the page.
Update: Select one of the entries in the static IP address table at the bottom of the page and, after
changing parameters, click Update to confirm the changes.
Delete: Select one of the entries in the static IP address table at the bottom of the page and click Delete
to remove the entry.
New: Click New to clear the text boxes and add required information to create a new entry.

3.8.4.2 Dynamic

This screen enables you to set NAT parameters and RIP V1 and RIP V2.
NAT: Click the radio buttons to enable or disable NAT.
Transmit: Click the radio buttons to set the desired transmit parameters, disabled, RIP 1, or RIP 2.
29