2.3 The Rear Ports
1
LAN
(4 connettori RJ-45)
5
WAN
6
RESET
7
POWER (Jack)
2.4 Cabling
The most common problem is bad cabling or ADSL/ISDN configuration. Make sure that all connected
devices are turned on. On the front of the product is a bank of LEDs. As a first check, verify that the
LAN/WLAN Link and Power line LEDs are lit.Verify that STATUS blink. If they are not, verify that
you are using the proper cables.
PORT
Auto MDI/MDIX LAN ports automatically
sense the cable type when connecting to
Ethernet-enabled computers.
The Auto MDI/MDIX WAN port is the
connection for the Ethernet cable to the Cable
or DSL modem
After the device has turned on, press it (10s) to
reset the device or restore to factory default
settings.
Receptor for the Power Adapter
MEANING