Troubleshooting - Zoom tac-8 Operation Manual

Troubleshooting

If you think that the
Cannot select or use the
switch to turn the
Playback sound cannot be heard or is quiet
speakers.
MAIN OUTPUT and/or PHONES 1/2 volume.
to check the built-in mixer settings.
Preferences is set to "ZOOM TAC-8".
Recorded audio is too loud, too quiet or silent
input gain levels
Preferences is set to "ZOOM TAC-8".
The sound of the device connected to the input jack is distorted
lighting red, lower the input levels.
Sound skips during playback or recording
using, increase the buffer size.
22
is operating strangely, check the following items first.
device
is connected to the computer correctly.
STAND ALONE switch is set to OFF .
, and use the POWER
off and on again.
Cannot play or record
"ZOOM TAC-8".
is set for input and output in the software
that you are using.
is connected to the computer correctly.
reconnect the Thunderbolt cable connected to the
Sound skips during digital input or output
connected correctly.
i s t h e m a s t e r, c o n f i r m t h a t a u d i o c l o ck i s
synchronized on the connected device.
is the slave, use
CLOCK SOURCE is set to the connection used for audio clock
synchronization.
is the slave, confirm that the CLOCK SOURCE
indicator is not blinking.
, and disconnect and
.
to confirm that the