Using Digital Audio Equipment; About Digital Audio Clock; Connecting S/Pdif Devices - Zoom tac-8 Operation Manual

Using Digital Audio Equipment

About Digital Audio Clock

When the is connected to other digit al audio
equipment, audio clock must be synchronized in order to transfer
audio data between them. If they are not synchronized, noise
and various other problems will occur.
To synchronize audio clock, one device must operate as the
master, which sets the reference clock, and the other must
operate as a slave.
Master
Slave
Digital device
The is operating as the master, and the audio clock of the
and the other digital device are synchronized.
14
Audio clock
Reference
clock
Synchronized
clock

Connecting S/PDIF Devices

1.
Minimize the volume of output devices connected to
the .
HINT
When connected, noise might occur until clock synchronizes.
2.
Set the same sampling rates for the
connected device.
NOTE
For instructions about how to change the sampling rate of the
, see the
and the
Reference Guide.