Setting Input And Output Devices; Playback - Zoom tac-8 Operation Manual

Setting Input and Output Devices

NOTE
Settings must be made in DAW software to use the
1.
Open the Sound pane of the System Preferences and
set both the Input and Output to "ZOOM TAC-8".
2.
Select the
device in the DAW software.
The inputs correspond to the ports as follows.
10
with it for recording and playback.
as the audio input and output
Input device
Device name Port name
ZOOM TAC-8 1 INPUT1
2 INPUT2
3 INPUT3
4 INPUT4
5 INPUT5
6 INPUT6
7 INPUT7
8 INPUT8
9 S/PDIF L
10 S/PDIF R
11 ADAT1
12 ADAT2
13 ADAT3
14 ADAT4
15 ADAT5
16 ADAT6
17 ADAT7
18 ADAT8
NOTE
You can use to route output signals to output
jacks freely.
For details, see the
HINT
See the owner's manual for the DAW software that you are
using for instructions about how to set the input and output
devices.
Corresponding input
Reference Guide.