Playback; Recording; Troubleshooting - Zoom Thunderbolt TAC-2 Operation Manual

Troubleshooting

Cannot select or use the
Confirm that the is connected to the
computer correctly.
Quit all the software that is using the
and disconnect and reconnect the Thunderbolt™
cable connected to the
Reinstall the driver.
Playback sound cannot be heard or is quiet
volume on the .
Recorded audio is too loud, too quiet or silent
Adjust the input gain of the
Confirm that no connection cable is plugged
When using a condenser mic, turn phantom
power on.
device The sound of the device connected to the
input jack is distorted
,
levels. If they are lighting, lower the input
levels.
.
Sound skips during playback or recording
If you can adjust the audio buffer size of the
software that you are using, increase the buffer
size.
Cannot play or record
Confirm that
the software that you are using.
C o n f i r m t h a t
.
computer correctly.
Quit all the software that is using the
and disconnect and reconnect the Thunderbolt™
cable connected to the
is set for input and output in
i s c o n n e c t e d t o t h e
,
.
13