Using Digital Audio Equipment
Connecting the WORD CLOCK Connectors
Use the WORD CLOCK connectors when you want to
synchronize with a master clock generator, for example.
1.
Minimize the volume of output devices connected to
the
.
HINT
When connected, noise might occur until clock synchronizes.
2.
Set the same sampling rates for the
connected device.
NOTE
For instructions about how to change the sampling rate of the
, see the
18
(continued)
and the
Reference Guide.
Using the connected device as the master clock
3.
Use
to set CLOCK SOURCE to WORD
CLOCK.
The WORD CLOCK CLOCK SOURCE
indicator will blink.
4.
Connect the other device to the WORD CLOCK IN.
(slave)
WORD CLOCK OUT connector
Master clock
generator, etc.
(master)
5.
The WORD CLOCK CLOCK SOURCE indicator
will light, confirming synchronization.
WORD CLOCK IN connector