Removing - Mercedes-Benz 2008 CL 550 4MATIC Operator's Manual

Make sure the jack arm is fully seated in the
jack take-up bracket.
If you do not position the jack correctly in
the jack take-up bracket, the vehicle can
fall off the jack and seriously or fatally injure
you or others.
! Do not position the jack on the body of
the vehicle, as this may cause damage to
the vehicle.
Take-up bracket
2
Jack
3
Crank
4
X
Place jack on firm ground.
3
X
Position jack under take-up bracket
3
so that it is always vertical as seen from
2
More user manuals on
the side, even if the vehicle is parked on an
incline.
X
Turn crank
fully seated in take-up bracket
jack base evenly meets the ground.
X
Jack up the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the ground.
ManualsBase.com
clockwise until jack is
4 3
and the
2
Practical hints
Removing the wheel
Alignment bolt
1
X
Unscrew uppermost wheel bolt and remove
it.
X
Replace this wheel bolt with alignment bolt
supplied with the vehicle tool kit.
1
X
Remove the remaining bolts.
! Do not place wheel bolts in sand or dirt.
This could result in damage to the wheel
bolts and wheel hub threads.
X
Remove the wheel.
Flat tire
Z
549