Mercedes-Benz 2008 CL 550 4MATIC Operator's Manual page 111

List of states with input characters
Top list entry based on the input data up
1
to that point
Characters entered by the user
2
Characters automatically added by the
3
system
Clear last character entry
4
Currently selectable characters
5
Currently non-selectable characters
6
Input characters
7
List of states
8
Currently selected characters
9
i In the list of input characters 7, you can
only select currently selectable characters.
Which characters are included depends on
the sequence in which you have entered
More user manuals on
your destination and the data version of the
digital map.
While the numbers are being selected as
described below, the top list entry
shows the state which best corresponds to
the input data as it has been entered up to
that point.
At the same time, COMAND automatically
supplements characters
user with other likely input characters 3.
X
Selecting characters: Slide
rotate ymz.
X
Confirming character selection:
Press n.
X
Deleting individual characters:
Select
X
Deleting an entire entry: Select
bottom line and press n until the entire
entry is deleted.
X Canceling an entry: Select Back in the
bottom line and press n.
or
X
Press back button
console (
As soon as COMAND can clearly attribute the
characters entered to a state, the input
characters
ManualsBase.com
COMAND navigation system (entering a destination)
always
1
entered by the
2
or
omp
in the bottom line and press n.
)
)
in the center
L
Y page 86).
disappear automatically. You
7
see the list of states without the input
characters. Here you can confirm the current
entry or make another selection.
During character entry, you can also manually
switch to the list of states without input
characters at any time.
X
Switching manually to list of states
without input characters: Slide qm.
or
X
Select in the second line from the
d
bottom and press n.
List of states without input characters
in the
Control systems
Z
109