Smartkey - Mercedes-Benz 2008 CL 550 4MATIC Operator's Manual

Practical hints
Vehicle status messages in the multifunction display
Display messages
Key
Not Detected
Key
Not Detected
Close Doors
to Lock Vehicle
Don't Forget
Your Key
510
More user manuals on
Possible cause/consequence
The SmartKey with KEYLESS-GO is not
detected while the engine is running
because there is strong radio-frequency
interference.
The SmartKey with KEYLESS-GO is
momentarily not detected.
You wanted to lock the vehicle but not all
doors were closed.
This display appears for a maximum of
60 seconds if the driver's door is opened
with the engine turned off and no
SmartKey in the starter switch. This
message is only a reminder.
ManualsBase.com
Possible solution
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the electronic parking brake.
X
Remove KEYLESS-GO button from the starter
switch ( Y page 302).
X
Operate the vehicle with the SmartKey in the
starter switch.
X
Change the position of the SmartKey in the
vehicle.
X
If necessary, remove KEYLESS-GO button from
the starter switch ( Y page 302).
X
Operate the vehicle with the SmartKey in the
starter switch.
X
Close doors and lock vehicle again.
X
Take the SmartKey with you when leaving the
vehicle.