Removing The Optional Vga Module - Dell poweredge t330 Owner's Manual

Next steps
1. Install the control panel assembly cover.
2. Connect the LCD cable, the control panel cable, and the control panel USB cable to the control
panel board.
3. Install the control panel assembly.
4. Connect the control panel cable, the LCD cable, and the control panel USB cable to the system
board.
5. Follow the procedure listed in
Related Tasks
Installing the control panel assembly cover
Installing the control panel assembly

Removing the optional VGA module

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the
2. Follow the procedure listed in
3. Remove the control panel assembly.
4. Remove the control panel assembly cover.
Steps
Release the hooks that secure the VGA module to the control panel board, and remove the VGA
module.
Figure 55. Removing and installing the optional VGA module
1. VGA module
After working inside your
Safety instructions.
Before working inside your
system.
system.
2. control panel
129