Dell poweredge t330 Owner's Manual page 95

Steps
1. Loosen the screw that secures the iDRAC port card holder to the system board.
2. Pull the iDRAC port card to disengage it from the iDRAC port card connector on the system board,
and remove the card from the chassis.
Figure 36. Removing and installing the iDRAC port card
1. iDRAC port
3. iDRAC port card connector
5. screw
Next steps
1. Install the iDRAC port card.
2. Follow the procedure listed in
Related Tasks
Removing the cooling shroud
Removing the internal cooling fan
Installing the optional iDRAC port card
Installing the internal cooling fan
Installing the cooling shroud
After working inside your
2. SD vFlash media card
4. iDRAC port card holder
system.
95