Installing The System Feet - Dell poweredge t330 Owner's Manual

3. Turn the system feet inward.
4. Place the system on its side on a flat and stable surface.
Steps
Remove the screws securing the system feet to the base of the tower.
Figure 11. Removing and installing the system feet
1. screw hole (4)
3. tab (12)
5. system feet (4)
Related Tasks

Installing the system feet

Installing the system feet
Prerequisites
CAUTION: Installing the feet on a stand-alone tower system is necessary to provide a stable
foundation for the system. Failure to install the feet poses the risk of having the system tip over,
possibly causing bodily injury or damage to the system.
1. Ensure that you follow the
2. Keep the Phillips #2 screwdriver ready.
3. Place the system on its side on a flat and stable surface.
Safety instructions.
2. slot (12)
4. base of the tower
6. screw (4)
53