Table of Contents
Advertisement
volume level slider, accessible from the
Audio Zone Levels menu. To access the
Audio Zone Levels menu, press and
hold
from any Now Playing
Screen.
Use
and press to select/make adjustments.
Tone Control Mode Settings:
Zone 1 (MAIN) tone controls can be
accessed by pressing
to make adjustments.
Zone 2 and Zone 3 tone controls
are available in two settings:
Same as Main Zone: The
tone controls are linked to/
controlled by Zone 1 (MAIN).
Independent Tone Controls: The tone
controls are separate with independent
adjustments that can be accessed
from the Audio Zone Levels menu. To
access the Audio Zone Levels menu,
press and hold
Now Playing Screen.
to
highlight a zone, then press
to access its tone controls;
use
to make adjustments.
Low Voltage Alert
A built-in alert is included to notify when
the +12VDC supply voltage drops below
10 volts. If triggered, the unit will enter
Safe Mode and mute audio output. A
warning will also display on-screen with
instructions to turn the unit off until
normal operating voltage is restored.
1. Press and hold
the System Settings: Main Menu.
2. Turn
and press to enter.
3. Turn
and press to enter.
to
highlight a zone
;
use
from any
Use
to access
to Low Voltage Alert
to select ON or OFF
Optional Remote Controller
Connecting an optional MMR-20 Wired
Remote Controller (sold separately) will
add auxiliary control functionality from
extended locations, such as separate
audio zones throughout a vessel. Up
to three remotes may be connected to
a single MediaMaster® at a maximum
distance of 75 ft. Remotes connect
directly using MediaMaster® controller
cables and splitters (sold separately).
Refer to the Owner's Manual supplied
with the MMR-20 for specific installation
and operation instructions.
17
Hide quick links:
Advertisement
Table of Contents
