Audio Zone Setup; Level Control Mode Settings - JL Audio MediaMaster 100s Owner's Manual

Audio Zone Setup

The MM100s is equipped with four sets
of low-voltage, line-level RCA outputs to
send audio signals to your aftermarket
amplifiers/equipment. Each output pair
delivers full-range, low-distortion audio,
arranged into four zones. Depending on
your equipment and vessel, this will allow
you to group speakers of an area together
for flexibility and control of audio levels
at separate zones. For example, you may
prefer to reduce the listening level in an
interior cabin, while keeping a louder
audio level on the main deck.
Zone
Zone 1 (MAIN)
Zone 2
Zone 3 / Subwoofer
Zone 4 (Fixed Level)
* Renames the zone to "Subwoofer" in the Audio Zone Levels menu and displays it after Zone 1.

Level Control Mode Settings:

Start Up Volume: This setting determines
the volume level when the unit is turned
ON and can be useful in preventing
sudden output bursts. Zone 1's Start
up Volume setting is always available,
while the Start up Volume settings
for Zone 2 and Zone 3 are available
only when their Level Control Mode
is set to Full-Range Absolute.
Full-Range Relative: This setting is used
to link the output level of Zone 2 or
Zone 3 to the volume level of Zone 1.
Menu
Primary Audio Zone
Level Control Mode
Tone Control Mode
Level Control Mode
Tone Control Mode
Selectable output voltage (4V, 2V, 1V or Off )
Access the Audio Zone Setup menu to
configure the functionality of each zone.
1. Press and hold
the System Settings: Main Menu.
2. Press
Zone Setup.
3. Use
Refer to the table below and following
info for each zone's available settings and
functionality.
Setting 1
Start up Volume
Full-Range Relative
Full-Range Absolute
Off
Same as Main Zone
Independent Tone Control
Subwoofer Relative*
Full-Range Relative
Full-Range Absolute
Off
Same as Main Zone
Independent Tone Control
When selected, Zone 2 or Zone 3's
volume level will proportionally track
Zone 1's volume. The offset level of
volume can be adjusted from the Audio
Zone Levels menu. To access the Audio
Zone Levels menu, press and hold
from any Now Playing Screen.
Use to
press to select/make adjustments.
Full-Range Absolute: When selected,
the output level of Zone 2 or Zone 3
will be independent, each with its own
Start up Volume setting and separate
16
to access
to select Audio
to make selections.
Setting 2
Start up Volume
Start up Volume
highlight a zone and