Connecting An Iphone® - JL Audio MediaMaster 100s Owner's Manual

Connecting an iPhone®
An iPhone® may be connected to the USB port using an appropriate Lightning to USB
cable (not included).
Once connected, press the
menu to access the connected device with the following controls:
Forward
Backward
Mute/Pause/
Resume
Back/Menu
Compatible models include iPhone® 5, 5c, 5s, 6, 6s, 6+, and 6s+ (equipped with Lightning connector)
• Properly secure the connected
device before driving to prevent
damage from dropping or
sudden acceleration/braking.
• Control, functionality and display
may vary depending on the model
and version of iPhone® connected.
• When connected via the USB port,
make sure to unpair or disable the
Bluetooth® connection to avoid
possible playback conflicts.
• If you experience abnormal
performance during operation,
disconnect the iPhone® and check
its condition. Restart your iPhone®
if performance does not improve.
button and select USB from the SOURCE: Select
• Press to select the next track
• Press and hold to fast-forward
• Press to select the previous track
• Press and hold to fast-rewind
• Press to pause or resume playing the current selection
• Press and hold to access Shuffle and Repeat options from the USB:
Play Options menu
• Press to access the USB: Main Menu options
• Press to go back or return to the Now Playing Screen
12
• "Made for iPhone" means that
an electronic accessory has been
designed to connect specifically to an
iPhone® and has been certified by the
developer to meet Apple performance
standards. Apple is not responsible
for the operation of this device or its
compliance with safety and regulatory
standards. Please note that the use
of this accessory with an iPhone®
may affect wireless performance.
• iPhone®, Lightning and all related marks
and logos are trademarks of Apple Inc.,
registered in the U.S. and
other countries.