Download Print this page

DeWalt DW078 Original Instructions Manual page 42

Hide thumbs Also See for DW078:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 32
EN GLI SH
• Never use compressed air to clean the
laser.
• Keep the ventilation slots clear and
regularly clean the housing with a
soft cloth.
• The flexible rubber shield can be cleaned
with a wet lint-free cloth such as a cotton
cloth. USE WATER ONLY — DO NOT use
cleansers or solvents. Allow the unit to air
dry before storing.
• Under some conditions, the glass lens
inside the rotary head may collect some
dirt or debris. This will affect beam quality
and operating range. The lens should be
cleaned with a cotton swab moistened
with water.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D
WALT provides a facility for the collection and
E
recycling of D
WALT products once they have
E
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
WALT office at the address indicated in this
E
manual. Alternatively, a list of authorised D
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
40
Rechargeable Battery Pack
This long life battery pack must be recharged when
it fails to produce sufficient power on jobs which
were easily done before. At the end of its technical
life, discard it with due care for our environment:
• Run the battery pack down completely, then
remove it from the tool.
• Li-Ion, NiCd and NiMH cells are recyclable. Take
them to your dealer or a local recycling station.
The collected battery packs will be recycled or
disposed of properly.
WALT product
E
WALT
E

Advertisement

loading