DeWalt DW03101 User Manual
Hide thumbs
Also See for DW03101:
- User manual (262 pages) ,
- Quick start (2 pages) ,
- Instructions manual (36 pages)
Table of Contents
Advertisement
Table of Contents
- - - - - - - - - - - - - - - - - - - - - - - 2
Introduction- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - 4
Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Adjusting measuring reference / tripod - - - - - - - - - - - 4
Multifunctional endpiece- - - - - - - - - - - - - - - - - - - - - - 5
Distance unit setting - - - - - - - - - - - - - - - - - - - - - - - - 5
Tilt unit setting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
Timer (automatic release) - - - - - - - - - - - - - - - - - - - - 5
Beep ON/OFF- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
Illumination ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - 6
Measuring single distance - - - - - - - - - - - - - - - - - - - - 7
Permament / Minimum-Maximum measuring - - - - - - - 7
Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Volume- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
Triangular area - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - 11
Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - 11
Pythagoras (partial height) - - - - - - - - - - - - - - - - - - - 12
Stake out - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
Smart Horizontal Mode - - - - - - - - - - - - - - - - - - - - - 13
Height tracking - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
Leveling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
Memory (20 last displays) - - - - - - - - - - - - - - - - - - - 15
- - - - - - - - - - - - - - - - - - - 7
Delete Memory - - - - - - - - - - - - - - - - - - - - - - - - - - -15
Calibration of tilt sensor (Tilt Calibration) - - - - - - - - -16
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -18
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -18
Areas of responsibility - - - - - - - - - - - - - - - - - - - - - -18
Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - -19
Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - -19
Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - -19
Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - -19
Disposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -19
Electromagnetic Compatibility (EMC) - - - - - - - - - - - -19
FCC statement (applicable in U.S.) - - - - - - - - - - - - -20
Laser classification- - - - - - - - - - - - - - - - - - - - - - - - -20
Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -20
Dewalt DW03101
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -16
- - - - - - - - - - - - - - - - - - - - - - - - -17
- - - - - - - - - - - - - - - - - - - - - - - -18
- - - - - - - - - - - - - - - - - - - - -18
EN
1
Advertisement
Table of Contents
Related Manuals for DeWalt DW03101
Summary of Contents for DeWalt DW03101
-
Page 1: Table Of Contents
Leveling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 Memory (20 last displays) - - - - - - - - - - - - - - - - - - - 15 Dewalt DW03101... -
Page 2: Instrument Set-Up
Important paragraphs which must be adhered to in practice Pythagoras / Volume / as they enable the product to be used in a technically Stake out Triangular correct and efficient manner. area Subtract Smart Horizontal DW03101 Mode / Measuring Height reference Tracking / Inclination Dewalt DW03101... -
Page 3: Display
Volume use zinc-carbon batteries. Timer Change batteries Stake out when battery symbol is flash- Measuring ing. Memory reference Circumfer- ence Pythagoras Angle Horizontal Wall area measurement Min/Max Indirect height Measuring Addition / Subtraction Units Main line 2nd result Dewalt DW03101... -
Page 4: Operations
OFF. fault operation tomatically. mode. Adjusting measuring reference / tripod Distance is measured from the tripod thread Distance is measured from the front of the device. permanently. Distance is measured from the rear of the device (standard setting). Dewalt DW03101... -
Page 5: Multifunctional Endpiece
The delayed release is recommended for precise aiming e.g. at long distances. It avoids shak- Adjust delay of au- ing of the device when pressing the tomatic release measurement key. (max. 60 sec, standard setting 5 sec) Dewalt DW03101... -
Page 6: Beep On/Off
Operations Beep ON/OFF Illumination ON/OFF 2 sec 2 sec simultaneously simultaneously Dewalt DW03101... -
Page 7: Measuring Functions
The same process can be The next meas- The next meas- used for adding or subtracting urement is added urement is sub- areas or volumes. 5.5I5 7.332 to the previous tracted from the I2.847 one. previous one. Dewalt DW03101... -
Page 8: Area
Measuring Functions Area The result is shown in the main line and the measured value above. Aim laser at first Aim laser at sec- 24.352 target point. ond target point. 2 sec 19.823 Circumference 24.3 52 Area Dewalt DW03101... -
Page 9: Volume
Aim laser at sec- Aim laser at third target point. ond target point. target point. The result is shown in the main line and 80.208 Circumference the measured 2 sec value above. 208.70 3 Wall areas 78.694 78.6 94 Volume Dewalt DW03101... -
Page 10: Triangular Area
Triangular area Aim laser at third Aim laser at sec- Aim laser at first ond target point. target point. target point. Angle included by the first 40.8 ° two measurements 2 sec 33.852 Circumference 24.352 24.3 52 Triangular area Dewalt DW03101... -
Page 11: Pythagoras (2-Point)
Aim laser at lower point. per point. tangular point. The result is shown in the main line and the measured distance above. Pressing the measuring key for 2 sec in the function activates automatically Minimum or Maxi- mum measurement. 8.294 Dewalt DW03101... -
Page 12: Pythagoras (Partial Height)
Aim laser at 2nd tangular point. per point. point. The result is shown in the main line and the measured distance above. Pressing the measuring key for 2 sec in the function activates auto- matically Minimum or Maximum measurement. 2.602 Dewalt DW03101... -
Page 13: Stake Out
0.24 0 up to next 0.625 m distance. Smart Horizontal Mode Press key again to switch off horizontal measure- α 24.3 ment. 0.032 Aim laser at tar- 4.82 7 get. (up to 360° and a transverse tilt of ±10°) Dewalt DW03101... -
Page 14: Height Tracking
The more it gets to 0° the faster it beeps. If an inclination of ±0.3° is The inclina- reached the device beeps continu- tion is dis- ously. played Place device on object to be levelled. (Range ±180°). Dewalt DW03101... -
Page 15: Memory (20 Last Displays)
Memory (20 last displays) Delete Memory 2 sec 2 sec The value from 20 last displays simultaneously Navigates trough the main line can are displayed. 20 last displays. 8.294 8.294 be used for fur- Memory is completely de- ther calculations. leted. Dewalt DW03101... -
Page 16: Calibration
After 2 sec the device 180° goes back to the nor- mal mode. Turn the device horizontally by 180° and place it again on absolutely flat surface. Dewalt DW03101... -
Page 17: Technical Data
125.2 x 58 x 32.6 mm 4.9 x 2.3 x 1.3 in Weight (with batteries) 154 g / 5.43 oz Temperature range: - Storage -25 to 70 °C -13 to 158 °F - Operation -10 to 50 °C 14 to 122 °F Dewalt DW03101... -
Page 18: Message Codes
Repeat the North America: calibration procedure. If North America: the mistake still occurs, • Three year limited warranty DEWALT Industrial Tool Co. contact your dealer. • One year free service Baltimore, MD21286, USA Calculation error Perform measurement • 90 day money back guarantee For service call 1-800-4-DEWALT. -
Page 19: Permitted Use
Do not use the product in explo- requirements of the relevant standards • Aiming directly in the sun sion hazardous areas or in aggressive and regulations. environments. Yet, the possibility of causing interference in other devices cannot be totally excluded. Dewalt DW03101... -
Page 20: Fcc Statement (Applicable In U
• Connect the equipment into an outlet on a circuit different from that to which the CAUTION receiver is connected. Looking into the laser beam may be • Consult the dealer or an experienced hazardous to the eyes. radio/TV technician for help. Dewalt DW03101...