Displaying And Maintaining Fc Routing And Forwarding; Static Fc Routing Configuration Example; Network Requirements - HP 5920 series Configuration Manual

Displaying and maintaining FC routing and
forwarding
Execute display commands in any view.
Task
Display FC routing table information.
Display FC FIB table information.
Display FC Exchange table information
Display FSPF neighbor information.
Display link state database information.
Display FSPF GR state information.
Display FSPF statistics.
Clear FSPF statistics.

Static FC routing configuration example

Network requirements

As shown in
other.
Figure 18 Network diagram
VFC100
XGE1/0/1
Switch A
Domain ID: 1
Figure 18, configure static routes to enable any two FCF switches to communicate with each
Switch B
Domain ID: 2
VFC201
VFC200
XGE1/0/3
XGE1/0/2
XGE1/0/3
Command
display fc routing-table [ vsan vsan-id ] [ statistics |
verbose ]
display fc routing-table vsan vsan-id fc-id [ mask |
mask-length ] [ verbose ]
display fc fib [ fcid [ mask-length ] ] vsan vsan- id
display fc exchange { link | protocol } [ slot slot-number ]
display fc exchange link verbose [ slot slot-number ] [ exid
exid ]
display fspf neighbor [ vsan vsan-id ]
display fspf lsdb [ vsan vsan-id ]
display fspf graceful-restart [ vsan vsan-id ]
display fspf statistics [ vsan vsan-id ]
reset fspf counters [ vsan vsan-id ]
VFC300
Switch C
Domain ID: 3
46