Time - Planet vrt-420n User Manual

Using the [ping] tool based on the instructions listed below
Interface
Target Host
Number of Packets
Ping
Using the [ARPing] tool based on the instructions listed below
Interface
Target Host
Number of Packets
ARPing
Using the [Trace Route] tool based on the instructions listed below
Interface
Target Host
Hop Count
Trace route
7.3

Time

Click on [Setup] – [Time] tab. You will see the following screen.
Select the interface that use to ping to, ie. WAN1,WAN2, LAN.
Enter the IP address to ping to
Specify the number of the ICMP packets to send out
Press the tab to start the "ping" actions
Select the interface that use to ARPing to, ie.WAN1,WAN2, LAN
Enter the MAC address to ARPing to
Specify the number of the ARP request packets to send out
Press the tab to start the "ARPing" actions
Select the interface that use to ARPing to, ie. WAN1, WAN2.
Enter the destination IP address / domain name to trace
Specify the Hop number you need to trace
Press the tab to start the "Trace Route" actions
59