Table of Contents
Advertisement
Region
Fragmentation
RTS
DTim
Beacon Interval
Header Preamble
TxMode
MPDU
MSDU Aggregate
Tx Burst
Packet Aggregate
HT Control Field
Reverse Direction Grant
Link Adapt
Short Guard Interval (SGI)
Operation Mode
HT Band Width
Block Ack Setup Automatically
Block Ack Window Size
Reject Block Ack
MCS
Choose the region you are currently located.
Enter the fragmentation bytes. The default value is 2346 bytes.
Enter the RTS seconds. The default value is 2347 seconds.
Enter the DTim seconds. The default value is 1.
Enter the interval to send a beacon. The default value is 100 milliseconds.
Choose Long or Short header preamble.
Choose different transmission mode.
MPDU data length. The transmission rate is increase when you choose a larger
number, but usually the max value will be 4 in the wireless card
A kind of packet aggregation method, it can improve the transmission efficiency.
Please make sure you Wireless card has this function supported.
Some 802.11g wireless card can supported this mode, and the transmission rate can
be increased when enable this function.
An aggregation method like A-MSDU, it can improve the transmission efficiency.
Please make sure you Wireless card has this function supported.
Choose Enable/Disable. It is useful when you need to debug the wireless network
Choose Enable/Disable. The response time can be shorter when enable this function.
Choose Enable/Disable. The function is use to dynamically change the modulation
and encode mechanism between wireless devices.
Choose Enable/Disable. Short GI can improve some transmission rate, but with less
immunity when interference exist.
Choose Mixed mode or Greenfield. You may choose Greenfield mode to increase the
transmission rate when you using 802.11n wireless network only.
Using HT20MHz or HT20/40MHz
Choose Enable/Disable. If your Wifi Card supported Block Ack mechanism, it can
improve the data transmission efficiency when enable this function.
Specify a Block Ack window size
Choose Enable to reject the request of BA from other Wireless device
Select transmission (connection) speed.
30
Advertisement
Table of Contents
