Table of Contents
Advertisement
Proceed as follows to activate 802.1x:
u
Choose Network authentication in the 802.1x field.
u
In the Radius Server field, enter your RADIUS server.
u
In the Radius Port field enter the port number used for the RADIUS service (default
value is 1812).
u
In the Radius key field, enter a keyword conforming to the conventions of the
RADIUS servers, which is to be used by the server for authentication.
u
Click on APPLY.
WEP encryption
If WPA is not supported by all network components, we advise you to activate the
Encryption
on your wireless network components.
To do this you must perform the following steps:
1. In the Network authentication field, select the Deactivated setting.
2. In the Data encryption field, select WEP-65 (for a 64 bit key) or WEP-128 (for a 128
bit key) and Hexadecimal or ASCII as the format in the Input mode field.
3. In the next field enter a key of your choice.
4. Activate WEP encryption on the wireless network adapters and enter the generated
64 or 128 bit key.
You must use the same keys for encryption and decryption for the Gigaset SE505 dsl/
cable and all your wireless network adapters.
You will find a detailed example of how to set WEP encryption in the doc-
i
ument entitled "Practical Tips and Configuration Examples" on the accom-
panying CD.
Configuration with Advanced Setup
WEP-
71
Advertisement
Table of Contents
